What it is
A battery energy storage system (BESS), typically lithium iron phosphate, connected to the property's PV installation, with an inverter and control system.
How it works
The battery stores the day's solar surplus and delivers it at night or during a grid outage. The controller decides when to charge and discharge based on tariff, priority load and battery state.
Compatible crops and activities
It applies to any property with significant loads outside the day: night pumping, refrigeration, electric fences, processing or scheduled irrigation. It does not depend on crop type.
PV configuration and design variables
Power (kW) and capacity (kWh) chosen from the load profile, tariff and desired backup level. Variables: depth of discharge, expected cycles, operating temperature, location and fire protection.
Potential benefits
It improves self-consumption, provides backup during outages and can reduce demand charges or peak-hour consumption, depending on the applicable tariff.
Risks and limitations
Batteries have a limited life and need replacement within the project horizon. Their cost may not be justified if the tariff does not reward shifting energy.
Economic conditions
It is modeled with installed cost per kWh, life, replacement and tariff savings. The scenario with and without a battery is compared before deciding to include it.
Agronomic and operational constraints
Batteries need a place protected from extreme heat, dust and water, and applicable electrical and safety rules. Interconnection and its regulation can limit grid injection.
The texts describe design principles and published evidence. They are not an offer, a performance guarantee or a recommendation for a specific property.
References
We do not cite agrivoltaic-specific studies for this solution. Sizing is based on the property's load profile and manufacturer technical data.