AgroWatts S.A. de C.V. · First Mexican company 100% focused on agrivoltaics · Founded in 2023
AgroWatts

Specialized frequently asked questions

Answers with sources to the most common technical questions on crops, light, height, measurement and design.

Which crops tolerate partial shade best?

Weselek et al. (2019) note that leafy vegetables and forages have the best chance of keeping their yield under moderate shade, and that in hot and dry climates shade can be favorable. In cereals such as wheat, rice and maize there is a strong relationship between yield and radiation. Results vary with variety and climate, and information on many species is missing, so each case must be measured.

How much light does the crop receive under the modules?

It depends on density, height, orientation and time of day. In systems adapted to the crop, Weselek et al. (2019) cite studies that estimate 60 to 85% of open-field radiation. In the lettuce trial of Marrou et al. (2013b), with 3.2 m between rows, up to 73% reached the plant. A value like that must be measured on site.

What clear height is needed?

It depends on the property's machinery. For cereals with large combine harvesters, Weselek et al. (2019) indicate at least 4 to 5 m. The DIN SPEC 91434 standard (2021) sets a minimum of 2.10 m for its category I. For other tasks, the height is defined with the actual machines to be used under the structure.

How do you verify that the crop remains the primary use?

The system's yield is compared with that of a reference plot over several seasons. The DIN SPEC 91434 standard (2021) requires the yield on the project area to reach at least 66% of the reference yield, and limits the agricultural area lost to less than 10% in category I and 15% in category II. Weselek et al. (2019) call for a minimum yield to be defined to avoid pseudo-agriculture.

Are bifacial modules useful in agrivoltaics?

They capture light reflected by the ground and surroundings, so they can add energy. The Heggelbach research facility in Germany uses bifacial modules (Weselek et al. 2019). The gain depends on ground reflectivity, height and geometry, and we do not give a general value without calculating it for a site.

What happens with rain and erosion under the modules?

The panels concentrate rainwater at their lower edge and leave sheltered areas beneath them. Weselek et al. (2019) describe a risk of erosion and gully formation after heavy rain, and observed it in their trial in early crop stages, when the soil was barely covered. It is mitigated with module angle, ground cover and drainage management, and must be assessed at each site.

Can it be combined with livestock?

Yes, there are systems with pasture under and between the modules. Hassanpour Adeh et al. (2018) measured, in an unirrigated pasture, higher soil moisture and higher late-season biomass under panels. The design must consider animal management and protection of the installation, and each species has different needs. On our site, the grazing page in the solutions section describes the case.

What LER value is good?

Above 1 indicates that producing the same output separately would need more land. Dupraz et al. (2011) modeled values equivalent to gains of 35 to 73%, that is, LER between 1.35 and 1.73, but these were model results. A high LER is not enough if the crop falls below the minimum yield required; the article on the LER explains the calculation.

How large are AgroWatts projects?

AgroWatts builds projects of 25 to 700 kWp, at the scale of distributed generation. The final size depends on demand, interconnection and engineering.

Is the Analyze my site estimate a quote?

No. It is a preliminary estimate with explicit assumptions. The closed price is delivered after the site studies and the basic engineering, following AgroWatts' work process.

References

  1. Weselek A., Ehmann A., Zikeli S., Lewandowski I., Schindele S., Högy P. (2019). Agrophotovoltaic systems: applications, challenges, and opportunities. A review. Agronomy for Sustainable Development, 39: 35. doi:10.1007/s13593-019-0581-3
  2. Marrou H., Wery J., Dufour L., Dupraz C. (2013b). Productivity and radiation use efficiency of lettuces grown in the partial shade of photovoltaic panels. European Journal of Agronomy, 44: 54-66. doi:10.1016/j.eja.2012.08.003
  3. Dupraz C., Marrou H., Talbot G., Dufour L., Nogier A., Ferard Y. (2011). Combining solar photovoltaic panels and food crops for optimising land use: Towards new agrivoltaic schemes. Renewable Energy, 36(10): 2725-2732. doi:10.1016/j.renene.2011.03.005
  4. Hassanpour Adeh E., Selker J.S., Higgins C.W. (2018). Remarkable agrivoltaic influence on soil moisture, micrometeorology and water-use efficiency. PLOS ONE, 13(11): e0203256. doi:10.1371/journal.pone.0203256
  5. DIN e.V. (2021). DIN SPEC 91434:2021-05. Agri-photovoltaic systems: requirements for primary agricultural use. Beuth Verlag. din.de

Back to the Knowledge Center

AgroWatts

Want to assess a project?

Analyze your land with our free tool or write to us for a feasibility study. Estimates are preliminary and are not a quote.