AgroWatts S.A. de C.V. · First Mexican company 100% focused on agrivoltaics · Founded in 2023
AgroWatts

Elevated agrivoltaics

Modules on tall structures that leave the ground free for cultivation, with machinery passing underneath.

hd
Schematic illustration, not a real installation. h: clearance height under the structure. d: spacing between module rows. Yellow arrows represent the light reaching the crop.

What it is

A system of PV modules mounted several meters above the ground on posts or pergolas, so the land beneath them remains in cultivation.

How it works

Module rows, with gaps between them, intercept part of the radiation and let direct and diffuse light reach the crop. The spacing between rows sets how much light the plant receives.

Compatible crops and activities

Fruit trees, berries, grapes, leafy greens and other crops that tolerate partial shade. Compatibility is assessed crop by crop and never assumed.

PV configuration and design variables

Rows of monofacial or bifacial modules, fixed or at low tilt. Variables: clearance height (h), row spacing (d), orientation and tilt. They are tuned with a light and shade model before the structure is fixed.

Potential benefits

It can reduce heat and water stress on the crop in warm climates and generate electricity for irrigation, cooling and other farm uses, using the land once.

Risks and limitations

If shade exceeds what the crop tolerates, yield can fall. Uneven shading, wind load and a higher cost per kWp than a ground-mounted plant are design risks.

Economic conditions

CAPEX per kWp is usually higher than for a ground-mounted plant because of the structure. Viability depends on electricity savings, the crop yield preserved and the height chosen.

Agronomic and operational constraints

Clearance must allow the tallest machinery on the property, and post spacing must match the working width. Irrigation and management must be adapted to partial shade.

The texts describe design principles and published evidence. They are not an offer, a performance guarantee or a recommendation for a specific property.

References

  1. Dupraz C., Marrou H., Talbot G., Dufour L., Nogier A., Ferard Y. (2011). Combining solar photovoltaic panels and food crops for optimising land use: Towards new agrivoltaic schemes. Renewable Energy, 36(10): 2725-2732. doi:10.1016/j.renene.2011.03.005
  2. Weselek A., Ehmann A., Zikeli S., Lewandowski I., Schindele S., Högy P. (2019). Agrophotovoltaic systems: applications, challenges, and opportunities. A review. Agronomy for Sustainable Development, 39: 35. doi:10.1007/s13593-019-0581-3
  3. DIN e.V. (2021). DIN SPEC 91434:2021-05. Agri-photovoltaic systems: requirements for primary agricultural use. Beuth Verlag. din.de
AgroWatts

Want to assess a project?

Analyze your land with our free tool or write to us for a feasibility study. Estimates are preliminary and are not a quote.